Standards
IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Cabling type
Category 5e or better
Antennas
Internal antennas optimised for desktop installation with vertical orientation
LED indicators
Power, WLAN, LAN
Operating system
Linux
Physical Interfaces
Ports
10/100/1000 Ethernet, with support for 802.3af /at PoE, power port for AC adapter (included)
Power Supply
External 12V 1.5A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af/at PoE
Buttons
Reset button, Power (on/off), Push button
Lock slot
Slot for Kensington lock
LEDs
Power, Wireless, Ethernet
Physical dimensions (W x D x H)
5.31 x 5.31x 1.5 in. (135 x 135 x 38 mm)
Weight
0.77lb or 350g
VLAN support
Yes
Number of VLANs
1 management VLAN plus 8 VLANs for SSIDs
802.1X supplicant
Yes
SSID-to-VLAN mapping
Yes
Auto channel selection
Yes
Spanning tree
Yes
Load balancing
Yes
IPv6
Yes
IPv6 host support
IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.
Layer 2
802.1Q-based VLANS, 8 active VLANS plus 1 management VLAN
WPA and WPA2
Yes, including Enterprise authentication
Access control
Yes, management access control list (ACL) plus MAC ACL
Secure management
HTTPS
SSID broadcast
Yes
Rogue-access-point detection
Yes
Mounting options
Desktop or wall
Physical security lock
Kensington lock slot
Quality of service (QoS)
Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS
Wireless throughput
Up to 1.2 Gbps data rate (real-world throughput will vary)
Recommended user support
Up to 64 connective users, 10 active users per radio
Web user interface
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Management protocols
Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Remote management
Yes
Event logging
Local, remote syslog, email alerts
Network diagnostics
Logging and packet capture
Web firmware upgrade
Firmware upgradable through web browser, imported/exported configuration file
Dynamic Host Configuration Protocol (DHCP)
DHCP client
IPv6 host
Yes
HTTP redirect
No
Frequency
Dual concurrent radios (2.4 and 5 GHz)
Radio and modulation type
Dual radio, orthogonal frequency division multiplexing (OFDM)
Wireless isolation
Wireless isolation between clients
External antennas
None
Internal antennas
Internal Fixed PiFA Antenna
Antenna gain in dBi
Maximum antenna gain of 3.61 dBi on 2.4 GHz
Maximum antenna gain of 3.85 dBi on 5 GHz
Wireless distribution system (WDS)
Yes
802.11i
Yes
Multiple SSIDs
8
Wireless VLAN map
Yes
WLAN security
Yes
Wi-Fi Multimedia (WMM)
Yes, with unscheduled automatic power save
Access point
Access Point mode, WDS Bridging, Workgroup Bridge mode
Multiple-Access Point Management
Single Point Setup Yes
Number of access points per cluster 4
Active clients per cluster 120
Power options
IEEE 802.3af Ethernet switch
Cisco Power Injector - SB-PWR-INJ2-xx
AC Adapter - included 12v1.5A
PoE Peak power: 9.8W
Compliance
Safety:
UL 60950-1
CAN/CSA-C22.2 No. 60950-1
IEC 60950-1
EN 60950-1
Radio approvals:
FCC Part 15.247, 15.407
RSS-210 (Canada)
EN 300.328, EN 301.893 (Europe)
AS/NZS 4268.2003 (Australia and New Zealand)
EMI and susceptibility (Class B):
FCC Part 15.107 and 15.109
ICES-003 (Canada)
EN 301.489-1 and -17 (Europe)
Operating temperature
0° to 40°C (32° to 104°F)
Storage temperature
-20° to 70°C (-4° to 158°F)
Operating humidity
10% to 85% noncondensing
Storage humidity
5% to 90% noncondensing
System memory
256-MB RAM
128-MB Flash
Package Contents
Cisco WAP150 WiFi Access Point
AC Power Adapter x1
User guide on CD-ROM x1
Quick-start guide x1
Ethernet network cable x1
Minimum Requirements
Switch or router with PoE support, PoE injector, or AC Power Adapter
Web-based configuration: Java-enabled web browser
Standards
IEEE 802.11ac, 802.11n, 802.11g, 802.11b, 802.3af, 802.3u, 802.1X (security authentication), 802.1Q (VLAN), 802.1D (Spanning Tree), 802.11i (WPA2 security), 802.11e (wireless QoS), IPv4 (RFC 791), IPv6 (RFC 2460)
Cabling type
Category 5e or better
Antennas
Internal antennas optimised for desktop installation with vertical orientation
LED indicators
Power, WLAN, LAN
Operating system
Linux
Physical Interfaces
Ports
10/100/1000 Ethernet, with support for 802.3af /at PoE, power port for AC adapter (included)
Power Supply
External 12V 1.5A DC power jack (Energy Star 2.0 compliant with Efficiency Level 5) and 802.3af/at PoE
Buttons
Reset button, Power (on/off), Push button
Lock slot
Slot for Kensington lock
LEDs
Power, Wireless, Ethernet
Physical dimensions (W x D x H)
5.31 x 5.31x 1.5 in. (135 x 135 x 38 mm)
Weight
0.77lb or 350g
VLAN support
Yes
Number of VLANs
1 management VLAN plus 8 VLANs for SSIDs
802.1X supplicant
Yes
SSID-to-VLAN mapping
Yes
Auto channel selection
Yes
Spanning tree
Yes
Load balancing
Yes
IPv6
Yes
IPv6 host support
IPv6 RADIUS, syslog, Network Time Protocol (NTP), etc.
Layer 2
802.1Q-based VLANS, 8 active VLANS plus 1 management VLAN
WPA and WPA2
Yes, including Enterprise authentication
Access control
Yes, management access control list (ACL) plus MAC ACL
Secure management
HTTPS
SSID broadcast
Yes
Rogue-access-point detection
Yes
Mounting options
Desktop or wall
Physical security lock
Kensington lock slot
Quality of service (QoS)
Wi-Fi Multimedia and Traffic Specification (WMM TSPEC), Client QoS
Wireless throughput
Up to 1.2 Gbps data rate (real-world throughput will vary)
Recommended user support
Up to 64 connective users, 10 active users per radio
Web user interface
Built-in web user interface for easy browser-based configuration (HTTP/HTTPS)
Management protocols
Web browser, Simple Network Management Protocol (SNMP) v3, Bonjour
Remote management
Yes
Event logging
Local, remote syslog, email alerts
Network diagnostics
Logging and packet capture
Web firmware upgrade
Firmware upgradable through web browser, imported/exported configuration file
Dynamic Host Configuration Protocol (DHCP)
DHCP client
IPv6 host
Yes
HTTP redirect
No
Frequency
Dual concurrent radios (2.4 and 5 GHz)
Radio and modulation type
Dual radio, orthogonal frequency division multiplexing (OFDM)
Wireless isolation
Wireless isolation between clients
External antennas
None
Internal antennas
Internal Fixed PiFA Antenna
Antenna gain in dBi
Maximum antenna gain of 3.61 dBi on 2.4 GHz
Maximum antenna gain of 3.85 dBi on 5 GHz
Wireless distribution system (WDS)
Yes
802.11i
Yes
Multiple SSIDs
8
Wireless VLAN map
Yes
WLAN security
Yes
Wi-Fi Multimedia (WMM)
Yes, with unscheduled automatic power save
Access point
Access Point mode, WDS Bridging, Workgroup Bridge mode
Multiple-Access Point Management
Single Point Setup Yes
Number of access points per cluster 4
Active clients per cluster 120
Power options
IEEE 802.3af Ethernet switch
Cisco Power Injector - SB-PWR-INJ2-xx
AC Adapter - included 12v1.5A
PoE Peak power: 9.8W
Compliance
Safety:
UL 60950-1
CAN/CSA-C22.2 No. 60950-1
IEC 60950-1
EN 60950-1
Radio approvals:
FCC Part 15.247, 15.407
RSS-210 (Canada)
EN 300.328, EN 301.893 (Europe)
AS/NZS 4268.2003 (Australia and New Zealand)
EMI and susceptibility (Class B):
FCC Part 15.107 and 15.109
ICES-003 (Canada)
EN 301.489-1 and -17 (Europe)
Operating temperature
0° to 40°C (32° to 104°F)
Storage temperature
-20° to 70°C (-4° to 158°F)
Operating humidity
10% to 85% noncondensing
Storage humidity
5% to 90% noncondensing
System memory
256-MB RAM
128-MB Flash
Package Contents
Cisco WAP150 WiFi Access Point
AC Power Adapter x1
User guide on CD-ROM x1
Quick-start guide x1
Ethernet network cable x1
Minimum Requirements
Switch or router with PoE support, PoE injector, or AC Power Adapter
Web-based configuration: Java-enabled web browser
Hỗ trợ mua hàng
Hỗ trợ Skype:
Viber / Zalo: